Crystal Glass / Identities
Natural and gentle to the eyes  
Minicrystal Stone is a kind of material made under high temperature through the process of sintering and crystallization, which is just similar to the conditions for the natural granite to come into being. Although the polished panel possesses a better finish than the natural stone material, because of its special crystallized structure, light projecting in at any angle can result in a homogeneous and concordant diffuse reflection, which is natural and gentle to the eyes of the people.  
Cellent weathering-quality & durability  
Minicrystal Stone has a better acid and alkali resistance than granite and marble. Being a kind of inorganic material with good chemical stability, even if it is exposed for a long time in rain, in wind and in contaminated air, such phenomena as quality change, color fading, dropping of strength etc. will never occur.  
plentiful colors  
Minicrystal Stone is a kind of homogeneous material made by adopting a special high temperature sintering process, which has eliminated the fine cracks that cause the rupture of natural stone panels. This process is good at manufacturing panels of various different color tones. The plentiful colors are formulated based on the white color, of which the three series of white, cream and grey are most popularly recommended by the designers.  
Zero water absorption and not easy to be contaminated  
Water absorption of Minicrystal Stone is in fact zero, so it is unnecessary to worry about demage caused by freezing and harmful penetration of rust, concrete slurry and grey pollutants etc. Moreover, the phenomenon of alkali separation on the panel is eliminated and the dirt adhere to the panel surface can be cleaned away very easily.  
Building material of green environment protection  
Minicrystal Stone is produced with the technical process of crystallizing the glass once again. Therefore, no radiation exsists and the environment will no means be polluted by manufacturing and application of the minicrystal stone panels.  
High strength and able to be lightened  
Minicrystal Stone is harder than natural stones and so is unlikely to be demaged. The thickness of the minicrystal stone panel can be regulated moderately to fit the method adopted for fixture and thus this kind of material goes with the tide of modern objects which are light and strong.  
Easy to be bent not only economic but also saving time  
The curved stone panels available in the market are cut and shaped from thick stone material and thus the cost is high due to long time required and high consumption of material. However, by adopting the heating method, the Minicrystal Stone can be processed into curved panels which are strong and light in weight.